Cyclades PC400 User Manual

Cyclades-PC400Installation ManualCyclades Corporation

10Chapter 3 Software InstallationNOTE: at this point you should read the file README included in the directory pc400-<version>to learn about an

11Chapter 3 Software InstallationThe left column presents the commands and parameters that should be followed when using make config.The right column

12Chapter 4 Board and System ConfigurationCHAPTER 4 BOARD AND SYSTEM CONFIGURATIONThis chapter describes the configuration of the Cyclades-PC400.

13Chapter 4 Board and System Configuration• Interface parameters set T1/E1-line specific parameters such as clock mode and signalling type.• Channel

14Chapter 4 Board and System ConfigurationParameters that define and apply to this logical linkinterfn_1_end...interfn_N_beginParameters that define

15Chapter 4 Board and System ConfigurationLabel Descriptionunit_name Identifies the board. The parameter should not exceed 20 characters.prompt Spe

16Chapter 4 Board and System ConfigurationParameters that define customized ISDN-PRI profiles.Label Descriptioncnx_profile_begin Up to 5 different r

17Chapter 4 Board and System ConfigurationParameters that define and apply to interfaces.Label Descriptioninterf#_begin Marks the beginning of the p

18Chapter 4 Board and System ConfigurationLabel Descriptiononhook_timer Valid only for CAS in Brazil. Valid values are 20-255, in units of a fracti

19Chapter 4 Board and System ConfigurationParameters that define and apply to channels (time slots). These go inside interface markers.channel_grou

Cyclades-PC400 Installation ManualVersion 2.1 – December 2001Copyright (C) Cyclades Corporation, 2001We believe the information in this manual is acc

20Chapter 4 Board and System Configuration# PC400 Firmware Downloadif [ -x /usr/local/sbin/pc400load ]; then/usr/local/sbin/pc400loadfi# PC400 Confi

21Chapter 4 Board and System ConfigurationCyclades-PC400 driver <version> <date> built <date>PC400 #1, RAM at 0xMMMM, IRQn, 64 ch

22Chapter 4 Board and System ConfigurationExample 1 A RAS Dial-in Application With Both Analog and Digital Incoming CallsT1/E1RemoteIP AddressAssig

23Chapter 4 Board and System ConfigurationParameter Description Value for T1lineValue for E1lineunit_name Name used to identify the board. PC400 PC4

24Chapter 4 Board and System ConfigurationParameter Description Value for T1lineValue for E1linerx_sensitivity Sensitivity for reception. shaul shau

25Chapter 4 Board and System ConfigurationExample 2 A LAN-to-LAN Example Using ChannelsHeadquarters’LANETH0T1/E1Affiliate’sLANPR1000Channels1-10Cha

26Chapter 4 Board and System ConfigurationParameter Description Value for T1lineValue for E1lineunit_name Name used to identify the board. PC400 PC4

27Chapter 4 Board and System ConfigurationParameter Description Value for T1lineValue for E1linerx_sensitivity Sensitivity for reception. shaul shau

Chapter 5 Troubleshooting 28Cyclades-PC400 Installation ManualCHAPTER 5 TROUBLESHOOTINGGeneral TipsWhat to Do When the PC400 is Not Recognized by th

29Chapter 5 TroubleshootingCyclades-PC400 Installation ManualHardware TestA menu-driven hardware test called pc400hwtest is included with the Cyclade

Table of ContentsCHAPTER 1 WHAT IS IN THE BOX ...

Chapter 5 Troubleshooting 30Cyclades-PC400 Installation ManualAfter choosing one of the first three options, the “global” screen appears as shown bel

31Chapter 5 TroubleshootingCyclades-PC400 Installation ManualBoard Port <---- PACKETS ---> Test : DSP From To From To Sent

Chapter 5 Troubleshooting 32Cyclades-PC400 Installation ManualAdministrative UtilitiesA program called pc400util is used for administrative functions

Cyclades-PC40033Appendix A - Linux Installation ManualAPPENDIX A INFORMATION FOR USERS NOT FAMILIAR WITH LINUXUsers and PasswordsA username and passw

Cyclades-PC40034Appendix A - LinuxInstallation Manual/home Contains the work directories of system users./bin Contains applications and utilities used

Cyclades-PC40035Appendix A - Linux Installation ManualOther commands allow the user to change directories and see the contents of a directory.pwd Supp

Cyclades-PC40036Appendix A - LinuxInstallation Manualedited, use the following keys:hmoves the cursor to the left (left arrow)jmoves the cursor to the

Cyclades-PC40037Appendix A - Linux Installation Manualnetstat -rnType man netstat at the Linux prompt for more informations about netstat options. Ro

Cyclades-PC40038Appendix A - LinuxInstallation ManualThe Process TableThe process table shows which processes are running and is displayed by tying ps

Cyclades-PC40039Appendix A - Linux Installation Manual -i get information from the boardSyslogThe syslog feature can be turned on, as an option

The Routing Table ...

Cyclades-PC40040Appendix A - LinuxInstallation Manual• status (active or inactive) - if this item is not active, the script will not be executed.• use

Cyclades-PC40041Appendix A - Linux Installation ManualPacket Filtering using ipchainsThe Linux utility ipchains can be used to filter IP packets enter

Cyclades-PC40042Appendix A - LinuxInstallation ManualThe output chain controls which packets are sent. A packet can be accepted by the input chain, bu

Cyclades-PC40043Appendix A - Linux Installation Manualexecuted at boot to invoke the last configuration saved.Another option is to edit the file /etc/

44Installation ManualAppendix B - Hardware SpecificationsCyclades-PC400APPENDIX B HARDWARE SPECIFICATIONSThis chapter provides the pinout diagram fo

Cyclades Corporation41829 Albrae StreetFremont, CA 94538 - USAPhone: (510) 770-9727Fax: (510) 770-0355www.cyclades.comCyclades South AmericaAv. Santa

5Chapter 1 What is in the BoxCHAPTER 1 WHAT IS IN THE BOXTwo Cyclades-PC400 models are available: one with DSPs (for analog modem connections) and

6Chapter 2 Hardware InstallationCHAPTER 2 HARDWARE INSTALLATIONThe body carries static electricity and if the person installing the PC400 is not cor

7Chapter 2 Hardware InstallationStep Three:Be careful to not touch any components inside the computer’s chassis, as they also can be damaged by stati

8Chapter 2 Hardware InstallationStep Four:Insert the board carefully into any unused PCI slot so that the external connector is aligned with the open

9Chapter 3 Software InstallationCHAPTER 3 SOFTWARE INSTALLATIONThe PC400 driver diskette contains the files needed to run the Cyclades-PC400 in a Li