Cyclades AlterPath OnBoard Installation Guide download pdf (Page 47)

Installation 31

5.Connecting a Terminal to Configure Basic Network Parameters

• Gateway IP address: _________________________________________

• Network Mask: _____________________________________________

If you are using a network time server, obtain the following

• NTP server IP address: _______________________________________

5. Connecting a Terminal to Configure Basic

Network Parameters

If you connect a terminal or computer to the console port, you can use the

cycli utility to configure basic network parameters as described in "To

Configure Basic Network Parameters Using a Terminal. The following figure

illustrates a computer connection being made to the console port.

Figure 2-8: Connecting a Terminal to the Console Port

An RJ-45 to DB-9 6 ft. crossover cable is shipped with the OnBoard for the

connection. Be sure that whatever cable you use is a crossover cable.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 103 104

No comments

Cyclades AlterPath OnBoard Installation Guide Page 47